Acticontact System

Acticontact is a new waste water treatment system based on the formation of biological films. In this system waste water and air are passed upflow through a reator tank charged with Actilite, a porous filling material.

Acticontact – Purification – Natures’s Way

In this way the Acticontact system permits the treatment of waste water in a simple and efficient manner. While being passed through the porous filling material, BOD substances in the water are fed on and decomposed by bacteria, which collect on the surfaces and in the pores of the filling material. Thus, Acticontact can take exceedingly high BOD loadings. What is more, Acticontact compares very favorably with other types of systmes in the efficiency of the elimination of BOD at the same degree of BOD loading.

Actilite is a porous filling material with a large surface area. Actilite is available in several different types. A suitable type is selected depending upon the nature of waste water to be treated.


Features

Higher BOD Loading/Compact Equipment

The conventional activated sludge process can take BOD loadings of 0.3 to 1.0 kg/m3/day. By contrast, Acticontact is capable of coping with BOD loadings as high as 3 to 17 kg BOD/m3/day. This means that Acticontact requires an oxidation contact area as low as one third to one tenth that of the activated sludge process. Likewise, Acticontact provides much larger effective surface areas than the biological disc filters. Consequently, Acticontact requires a munimum of equipment cost and installation space.

Better Adaptability to Fluctuations in Waste Water Quality Easy Maintenance

Actilite has effective surface areas as high as 200 to 500 m2/m3. Since bacteria or MLSS collect not only on the surface of the filling material but also in its voids, the amount of MLSS on Actilite is as large as 10,000 to 15,000 mg/liter. Consequently, the purification efficiency of Acticontact is very high. What is more Acticontact can well cope with substantial variations in BOD loading and pH, as well as any other changes in the operating conditions.

Since bacteria are fixed on the filling material, there is no need for sludge retrun and there are not any such problems as bulking which are inherent in the conventional biological processes.

Smaller Volumes of Sludge

The surface of the biological film of Acticontact is in the aerobic state while its interior suface is in the anaerobic state. This anaerobic state contributes to the autotrophy of sludge. What is more, the sludge life is longer due to higher sludge concentrations in the reactor tank, and the longer food chain formed by many species of microorganisms results in a smaller volume of sludge generated in the tank.

More specifically, the volume of sludge generated in the Acticontact reactor is one half to one third that generated in the conventional activated sludge process.

No Seed Sludge Required – Better Restart

No seed sludge is required for the start-up of the Acticontact reactor. The reactor starts to work fully within two days to one week after simply feeding waste water and air through the reactor. Microorganisms grown in the reator are fixed or retained on its filling material. Therefore, any temporary stoppage of the treatment operation does not retard the start of the next treatment.

ส็อตออนไลน์รวม sitemap